Tour Recap: Edison Price Lighting Factory

Posted admin Post
 

“Our niche is people who want quality lighting that will last a long time,” explained Emma Price, the President of Edison Price Lighting, when asked about her company’s specialty. “You have to do high-quality [if you want to manufacture things] in New York City. You can’t just make cheap stuff, here.”

Established in 1952, Edison Price has over 60 years of experience designing and manufacturing high-quality energy-efficient lighting fixtures at their factory in Long Island City, Queens, in the shadow of the Queensboro Bridge. The company has completed many high-profile projects, including the refurbishment of the lighting fixtures for the United Nations, and lighting the new 9/11 Memorial Museum. Emma’s father was a friend and frequent collaborator of legendary Modernist lighting designer Richard Kelly, and the company worked with him to light the Yale Art Gallery, the Seagram Building, and other architectural landmarks.

Edison Price Tour Photos 018

Nina Rappaport (left) and Emma Price (right) welcome tour participants to Edison Price Lighting’s Long Island City factory (Photo: OHNY)

In that time, the company has witnessed the city’s economic and technological landscape transform dramatically, and its physical surroundings are now following suit. On July 16th, Emma and her team hosted a factory tour, organized and presented by Vertical Urban Factory curator and project director Nina Rappaport, as part of Open House New York’s (OHNY) and New York City Economic Development Corporation’s (NYCEDC) Making it Here series.

In the 1900s, Long Island City was a vibrant manufacturing center, thanks to the area’s efficient transportation networks and large skilled labor pool. But as technology advanced and outsourced labor became more economically strategic for many manufacturing firms, the area’s industrial community took a huge blow. “After NAFTA, a many cities simply let the manufacturers go,” Nina noted in her introduction. “Many planners thought that manufacturing wasn’t something that was needed in cities anymore. As a result, we wound up with land zoned for manufacturing sitting empty, which was an impetus for rezoning to other uses.”

Edison Price Tour Photos 155

Just outside, glittering new residential buildings are on the rise. (Photo: OHNY)

More recently, large sections of New York’s manufacturing districts have been rezoned for residential and commercial uses as the land values of waterfront property in the city have soared due to the increased interest in urban living. This is especially true of LIC, but despite mounting pressure to leave the area, Edison Price has chosen to stay right where they are. The area’s transit access, still important to attracting skilled workers, also makes it easy for architects and lighting designers—the company’s core clients—to get to the factory themselves.

By specializing in the production of high value added goods, companies like Edison Price provide essential services to the more glamorous, high-profile sectors of the city’s economy, architecture and design among them. The symbiotic relationship between design industries and manufacturers that specialize in creating unique products is one of the mainstays of urban economies. For Edison Price, that means working directly with the people who design the lighting for the buildings in which we live, work, and play. Both architect and manufacturer are able to fine-tune what they do in order to produce better results based on their collaborative work, and are thus better off for being near each other, Nina noted.

Edison Price Tour Photos 044

The factory tour was led by factory manager George Closs (left). (Photo: OHNY)

After Emma’s and Nina’s introductions, factory manager George Closs led tour participants through the almost 50,000-square-foot facility to learn more about how custom lighting fixtures are made. On average, Edison Price manufactures $20 million in product per year. George emphasized that Edison Price is “made in New York City,” and that its products are American to the core. For the past 60 years, Edison Price has done all design, research, and production work within its LIC facility. Furthermore, every material and machine used to produce light fixtures at Edison price is made in the United States.

Edison Price Tour Photos 097

Bins of metal shavings are collected and sold to metal recycling firms. (Photo: OHNY)

During the tour, the factory floor buzzed with the rhythmic sounds of dozens of machines drilling and making calculated cuts and punches. George pointed out an impressive group of machines that cut and shaped metal into light fixtures, and a laser-cutting machine larger than most New York City bedrooms. “We have zero inventory,” he told the group, explaining that the factory manufactures its products using just-in-time scheduling to send out orders as soon as they’re finished being made. This cuts back on the space that the company needs to occupy, allowing for the more efficient use of space.

Edison Price Tour Photos 113

A large punch press makes precise, rapid cuts through metal sheeting. (Photo: OHNY)

Edison Price also stands out for a unique factory layout that allows the company to take advantage of the city’s aforementioned skilled labor pool. The company utilizes small teams of workers who are cross-trained to be able to work on fixtures at any step in the production process, rather than using the more common assembly line model, where workers specialize in a single monotonous step. Here, employees are valued for their adaptability and flexibility, rather than serving as cogs in a machine.

Edison Price Tour Photos 026

At Edison Price, employees are valued for their adaptability and flexibility, rather than serving as cogs in a machine. (Photo: OHNY)

Afterward, Nina discussed her Vertical Urban Factory project, explaining that she is working directly with manufacturers like Edison Price to think through how they might be able to continue growing in place while also taking advantage of changing trends in urban real estate like those affecting Long Island City. “Could you have a situation where Edison Price is able to develop a residential project above its factory, have mixed uses in place, which is something rarely considered, and stay in its building in the long term?” Nina asked, before hinting that she’s working with the city’s planning department to think through potential future scenarios.

A visit to a facility like Edison Price Lighting’s is an eye-opening experience. It illustrates why creating adequate space for manufacturers is still so important to New York’s economy. Creative types benefit greatly from being able to work directly with the people who make their ideas work, and vice versa. In order for the city’s creative industries to thrive, both sides of the coin have to be considered.

Edison Price Tour Photos 064

A visit to a factory like Edison Price’s illustrates why creating adequate space for manufacturers is still so important to New York’s economy. (Photo: OHNY)


OHNY and NYCEDC thank Nina and Edison Price Lighting for welcoming participants into the factory for this tour.

Tour Recap: Standard Motors Products Building

Posted admin Post
 

When the 300,000-square-foot Standard Motors Products Building was completed in 1919, it was at the heart of one of the most important manufacturing hubs in the world. Situated on an ideal site with direct access to the sprawling Sunnyside Railroad Yard, the building was and remains a dominant presence on the Long Island City skyline, serving as a reminder of the area’s past role as an industrial powerhouse. But today, while Standard Motors leases space here for its corporate offices, the manufacturing of automotive parts has been moved off-site.

That’s not to say that manufacturing has left the building entirely. In fact, the opposite is true: since purchasing the building from Standard Motors in 2008, Acumen Capital Partners LLC has renovated the structure and worked to integrate a mix of light manufacturing spaces into a multi-use hive of activity, a virtual city-within-a-city. On Friday, May 16th, Open House New York toured the building with Vertical Urban Factory curator and project director Nina Rappaport, who explained how the factory’s adaptation over time reflects the larger trends that have been re-shaping urban manufacturing for the past few decades.

The tour, which kicked off OHNY’s and the New York City Economic Development Corporation’s Making it Here series on manufacturing in New York, started in the building’s lobby, an attractive space designed by Bromley Caldari Architects in 2010 that features rotating exhibits. Nina began by outlining some of the themes of her Vertical Urban Factory project, through which she has spent the past few years researching the history of urban factory architecture as well as exploring how the evolution of manufacturing into “smaller, cleaner, and greener” processes has impacted cities. Rather than being thought of as dirty and undesirable, Nina believes that factories can and should be places that enhance the communities in which they are located. “Cities,” argued Nina, “still need labor. So it’s important that we consider how we can make factories places of pride for workers.”

Brooklyn Grange’s flagship farm, which contains 1.2 million pounds of earth that were lifted into place by crane, occupies the building’s roof. (Photo: OHNY)

Brooklyn Grange’s flagship farm, which contains 1.2 million pounds of earth that were lifted into place by crane, occupies the building’s roof. (Photo: OHNY)

Brooklyn Grange, the first stop on the tour, offered a striking example of one way that Acumen has attempted to do just that. The Grange’s first industrial-scale farm opened on the roof of the Standard Motors Products Building in 2010. It took a week to lift more than 1.2 million pounds of earth up by crane, creating what is now one of the largest rooftop soil farms in the world (along with the Grange’s second farm in the Brooklyn Navy Yard, which opened in 2012). Today, this one-acre (43,000-square-foot) farm not only produces fresh fruits and vegetables, it hosts seasonal community farmers markets, and provides educational programming to more than 7,000 kids from local schools every year through a partnership with City Growers.

The Grange takes advantage of the Standard Motors Products Building’s solid industrial architecture, which includes a concrete structural frame with “mushroom columns” that can support heavier loads—and the farm returns the favor. “The farm acts like a blanket on the roof,” explained farm manager Brad Flemming, who led the Grange portion of the tour. “It’s lowered energy costs throughout the building.”

Farm manager Brad Flemming introduces participants to the chickens that live in the Grange’s rooftop coop. (Photo: Nina Rappaport)

Farm manager Brad Flemming introduces participants to the chickens that live in the Grange’s rooftop coop. (Photo: Nina Rappaport)

Back inside, Nina led the group down to Standard Motors’ headquarters, which features a small exhibit on the company’s 95-year history that includes dozens of parts and components that were once manufactured on site. In fact, the company’s manufacturing operations—95% of which once took place in the LIC building, employing more than 2,000 people at its peak—only just left the site in 2008.

Nina leads the group through the gallery that displays almost a century’s worth of Standard Motors products, once manufactured on-site. (Photo: OHNY)

Nina leads the group through the gallery that displays almost a century’s worth of Standard Motors products, once manufactured on-site. (Photo: OHNY)

The vacancy left by Standard Motors’ relocation was quickly occupied by a variety of niche manufacturers, including Gailer, a print finishing company that specializes in foil stamping, embossing, die cutting, and laminating. Gailer occupies several thousand square feet on the third floor of the building, where they employ 45 people. In touring the space, Mike Pinciotto provided demonstrations of how various pieces of heavy machinery are used to create a wide range of high-quality printed products, from customized invitations to booklets to media kits.

Gailer’s Mike Pinciotto (second from left) explains how the various pieces of heavy machinery in the facility were lifted in through the windows, by crane. (Photo: OHNY)

Gailer’s Mike Pinciotto (second from left) explains how the various pieces of heavy machinery in the facility were lifted in through the windows, by crane. (Photo: OHNY)

Gailer was founded at a time when New York City was the center of the nation’s printing industry; today, the company works with a wide and diverse range of mostly local clients. Their competitive edge is in their proximity to their market, as the process of print finishing can be very complex, and every job is unique. “Designers will design [a job] and send it to us, and sometimes we really have to struggle with it to figure out how to make it work,” Mike explained. This requires creativity, not to mention some highly specialized skills that employees at Gailer learn over the span of their careers. “Learning the machines is like an apprenticeship. It takes years.”

Shelves full of foil await the stamping presses. (Photo: OHNY)

Shelves full of foil await the stamping presses. (Photo: OHNY)

After Gailer, the tour made several stops at smaller firms that gave participants a chance to see the range of spaces in the huge facility that once served a single massive manufacturing operation—and how different types of firms are coexisting. The tour included visits to Jenex Graphics, a commercial printer; Caples Jefferson, an architecture firm; and VanDeb Editions, a print maker that works with local artists to create works of art through etching and monotype. This range of spaces helped participants to better understand the spatial needs of manufacturing in a city where the majority of manufacturers employ fewer than ten people.

Jenex Graphics employs seven people in their facility in the basement of the building; the majority of manufacturers in NYC today employ fewer than 10 people. (Photo: OHNY)

Jenex Graphics employs seven people in their facility in the basement of the building; the majority of manufacturers in NYC today employ fewer than 10 people. (Photo: OHNY)

The tour of the Standard Motors Products Building gave participants an opportunity to experience, firsthand, how manufacturing spaces can (and do) coexist happily with office space, arts spaces, and other uses. Through the addition of amenities like the Brooklyn Grange farm (which almost all of the other businesses mentioned, fondly, at various points in their presentations) and ground-level retail spaces created in former truck bays along Northern Boulevard, Acumen has created a dynamic complex that incorporates industry while improving the surrounding neighborhood—supporting Nina’s argument that integrating “smaller, cleaner, and greener” manufacturing back into our neighborhoods can create a more equitable city by giving workers a sense of pride in the places where they work.

VanDeb Editions co-founder Deborah Freedman explains how her facility produces limited runs of prints for a variety of NYC-based artists. (Photo: Nina Rappaport)

VanDeb Editions co-founder Deborah Freedman explains how her facility produces limited runs of prints for a variety of NYC-based artists. (Photo: Nina Rappaport)


OHNY and NYCEDC thank Nina, Acumen, and all of the businesses that welcomed participants into their spaces for the inaugural Making it Here tour.